WinXP Produkt-Key ändern

Windows 1 über 9x bis hin zu Vista, 7, 8, 10 und 11 sowie zukünftige Systeme
Unix / Linux in allen Derivaten und Varianten
Antworten
Benutzeravatar
oxpus
Administrator
Beiträge: 28737
Registriert: Mo 27.Jan, 2003 22:13
Wohnort: Bad Wildungen
Kontaktdaten:

WinXP Produkt-Key ändern

Beitrag von oxpus »

HOW TO: Change the Volume Licensing Product Key on a Windows XP SP1-Based Computer
The information in this article applies to:
Microsoft Windows XP Professional SP1
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
Q256986 Description of the Microsoft Windows Registry
IN THIS TASK
SUMMARY
Use the Activation Wizard
Use a Script
ChangeVLKeySP1.vbs
ChangeVLKey2600.vbs
Example
SUMMARY
This article describes how to change the Windows XP product key in a Volume Licensing installation.

Because of changes in Windows XP Service Pack 1 (SP1), Windows XP-based computers that use a leaked product key that is known to be available to the general public may not be able to install SP1 or automatically obtain updates from the Windows Update Web site. For example, you may experience the symptoms that are described in the following Microsoft Knowledge Base article when you install SP1:


Q326904 Error Message: The Product Key Used to Install Windows Is Invalid
There are two methods that you can use to change the product key with volume licensing media after installation. You can use either the Windows Activation Wizard graphical user interface (GUI) or a Windows Management Instrumentation (WMI) script.

The easier method to use is the Use the Activation Wizard method. Use this method when you only have a few computers on which to change the product key. The Use a Script method is best when you have a number of computers on which you have to change the product key.

back to the top
Use the Activation Wizard
If you have only a few volume licensing product keys to change, you can use the Activation Wizard.

NOTE: Microsoft recommends that you run System Restore to create a new restore point before you complete the following steps. For information about how to create a restore point by using System Restore, see the "To Create a Restore Point" help topic in Help and Support.

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

Click Start, and then click Run.
In the Open box, type regedit, and then click OK.
In the left pane, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Cu
rrent Version\WPAEvents
In the right pane, right-click OOBETimer, and then click Modify.
Change at least one digit of this value to deactivate Windows.
Click Start, and then click Run.
In the Open box, type the following command, and then click OK.
%systemroot%\system32\oobe\msoobe.exe /a
Click Yes, I want to telephone a customer service representative to activate Windows, and then click Next.
Click Change Product key.
Type the new product key in the New key boxes, and then click Update.

If you are returned to the previous window, click Remind me later, and then restart the computer.
Repeat steps 6 and 7 to verify that Windows is activated. You receive the following message:
Windows is already activated. Click OK to exit.
Click OK.
Install SP1 for Windows XP.

If you cannot restart Windows after you install SP1, press F8 when you restart the computer, select Last Known Good Configuration, and then repeat this procedure.
back to the top
Use a Script
You can create a WMI script that changes the volume licensing product key, and then deploy this script in a startup script. The sample ChangeVLKey2600.vbs script and the sample ChangeVLKeySP1 script that are described in this section use the new volume licensing key that you want to enter, in its five-part alphanumeric form, as a single argument. Microsoft recommends that you use the ChangeVLKey2600.vbs script on Windows XP-based computers that are not running SP1 and that you use the ChangeVLKeySP1.vbs script on Windows XP-based computers that are running SP1. These scripts perform the following functions:
They remove the hyphen characters (-) from the five-part alphanumeric product key.
They create an instance of the win32_WindowsProductActivation class.
They call the SetProductKey method with the new volume licensing product key.
You can create a batch file or a cmd file that uses either of the following sample scripts, together with the new product key as an argument, and either deploy it as part of a startup script or run it from the command line to change the product key on a single computer.

back to the top
ChangeVLKeySP1.vbs
'
' WMI Script - ChangeVLKey.vbs
'
' This script changes the product key on the computer
'
'*************************************************
**************************

ON ERROR RESUME NEXT


if Wscript.arguments.count<1 then
Wscript.echo "Script can't run without VolumeProductKey argument"
Wscript.echo "Correct usage: Cscript ChangeVLKey.vbs ABCDE-FGHIJ-KLMNO-PRSTU-WYQZX"
Wscript.quit
end if

Dim VOL_PROD_KEY
VOL_PROD_KEY = Wscript.arguments.Item(0)
VOL_PROD_KEY = Replace(VOL_PROD_KEY,"-","") 'remove hyphens if any

for each Obj in GetObject("winmgmts:{impersonationLevel=impersonate}").InstancesOf ("win32_WindowsProductActivation")

result = Obj.SetProductKey (VOL_PROD_KEY)

if err <> 0 then
WScript.Echo Err.Description, "0x" & Hex(Err.Number)
Err.Clear
end if

Next
back to the top
ChangeVLKey2600.vbs
'
' WMI Script - ChangeVLKey.vbs
'
' This script changes the product key on the computer
'
'*************************************************
**************************

ON ERROR RESUME NEXT

if Wscript.arguments.count<1 then
Wscript.echo "Script can't run without VolumeProductKey argument"
Wscript.echo "Correct usage: Cscript ChangeVLKey.vbs ABCDE-FGHIJ-KLMNO-PRSTU-WYQZX"
Wscript.quit
end if

Dim VOL_PROD_KEY
VOL_PROD_KEY = Wscript.arguments.Item(0)
VOL_PROD_KEY = Replace(VOL_PROD_KEY,"-","") 'remove hyphens if any
Dim WshShell
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents\OOBETimer" 'delete OOBETimer registry value
for each Obj in GetObject("winmgmts:{impersonationLevel=impersonate}").InstancesOf ("win32_WindowsProductActivation")

result = Obj.SetProductKey (VOL_PROD_KEY)

if err <> 0 then
WScript.Echo Err.Description, "0x" & Hex(Err.Number)
Err.Clear
end if

Next
back to the top
Example
The following example describes how to use the ChangeVLKeySP1.vbs script from a command line:
Click Start, and then click Run.
In the Open box, type the following command, where AB123-123AB-AB123-123AB-AB123 is the new product key that you want to use, and then click OK:
c:\changevlkeysp1.vbs ab123-123ab-ab123-123ab-ab123
Antworten